> For the complete documentation index, see [llms.txt](https://sandbox-docs.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://sandbox-docs.verifone.com/install-guide-type-2/readme.md).

# V660p-A Quick Installation Guide

***

## 1. In the Box

<figure><img src="/files/IKiVIOILqzxWyD2ljQXA" alt=""><figcaption></figcaption></figure>

| Label | Item                              |
| ----- | --------------------------------- |
| **a** | Packing box                       |
| **b** | V660p device                      |
| **c** | Power cable                       |
| **d** | Power brick *(varies by country)* |
| **e** | Paper roll                        |

***

## 2. Front of Device

<figure><img src="/files/934zVABJMRDaJoRILRGM" alt=""><figcaption></figcaption></figure>

| Label | Component          |
| ----- | ------------------ |
| **a** | Printer            |
| **b** | Front camera       |
| **c** | Charging indicator |
| **d** | Audio jack         |
| **e** | USB Type-C Port    |
| **f** | Power button       |
| **g** | Volume controls    |
| **h** | Display            |

{% hint style="info" %}
**Power ON/OFF:** Press and hold the power button down for **3 to 5 seconds** and then release.
{% endhint %}

***

## 3. Side of Device

<figure><img src="/files/5NnHc1fy8QECVUvCJCvr" alt=""><figcaption></figcaption></figure>

| Label | Component       |
| ----- | --------------- |
| **i** | NFC Contactless |
| **j** | Printer Paper   |
| **k** | MSR             |
| **l** | EMV Reader      |

***

## 4. Rear of Device

<figure><img src="/files/o76IIAJnFgsUW7aa203A" alt=""><figcaption></figcaption></figure>

| Label | Component                             |
| ----- | ------------------------------------- |
| **m** | Flash LED                             |
| **n** | Rear Camera                           |
| **o** | Battery Cover                         |
| **p** | Pogo Pin Connectors for optional base |
| **q** | Speaker                               |
| **r** | Nonslip grips                         |

***

## 5. Install SIM

{% stepper %}
{% step %}

#### Open the battery cover

Slide the battery cover latch upward **(a)** and use the pull tab to lift the cover off **(b)**.

<div align="center"><img src="/files/9sjZaWzMi8BoYe7nSrkf" alt="Step 5a — Slide latch up and lift battery cover"></div>
{% endstep %}

{% step %}

#### Remove the battery

Lift the battery out of the compartment **(c)**. The SIM and PSAM card slots are now visible **(d)**.

<div align="center"><img src="/files/YhUW2lfuHkz7p4KbLtLN" alt="Step 5b — Remove battery to reveal SIM and PSAM slots"></div>
{% endstep %}

{% step %}

#### Insert SIM and PSAM cards

Slide cards into the correct slots **(e)**:

<div align="center"><img src="/files/mvvVZPW0nN4VvE4uG42P" alt="Step 5c — Insert SIM and PSAM cards into labelled slots"></div>

| Slot          | Card                             |
| ------------- | -------------------------------- |
| PSAM-1        | Primary security access module   |
| SIM-2         | Secondary SIM                    |
| SIM-1         | Primary SIM                      |
| PSAM-2        | Secondary security access module |
| {% endstep %} |                                  |

{% step %}

#### Replace the battery and close the cover

Lift the battery out **(f ①)**, then press the release tab **(f ②)** and lower the cover back. Press down firmly until the latch clicks **(g)**.

<div align="center"><img src="/files/zQCHXP2bF0ZWmPVZLREJ" alt="Step 5d — Replace battery and close cover"></div>
{% endstep %}
{% endstepper %}

***

## 6. Load Paper Roll

<figure><img src="/files/42N8bFCprcYPZUfsr6Qx" alt=""><figcaption></figcaption></figure>

{% stepper %}
{% step %}

#### Open the printer cover

Grip the device firmly **(a)** and press the printer release latch to open the cover **(b)**.
{% endstep %}

{% step %}

#### Insert the paper roll

Drop the paper roll into the compartment with the paper feeding from the bottom **(c ①② )**.
{% endstep %}

{% step %}

#### Close the printer cover

Pull a small length of paper out, then press the cover closed firmly until it clicks **(c ③)**.
{% endstep %}
{% endstepper %}

***

## 7. Charge the Device

<figure><img src="/files/I8l3DMUhEMxBfayxV4ir" alt=""><figcaption></figcaption></figure>

Connect the **USB-C** end of the cable to the port on the side of the device. Connect the **USB-A** end to the power brick and plug the brick into a wall outlet. The charging indicator **(c)** will light up when charging.

{% hint style="info" %}
The charging indicator is on the front of the device. A steady light means charging; no light means not connected.
{% endhint %}

***

## 8. Accept Payments

{% tabs %}
{% tab title="8a — EMV Chip" %}

<div align="center"><img src="/files/h8RcnnavsvnSXmJUDQlW" alt="Step 8a — Insert EMV chip card into the slot at the base of the device"></div>

Insert the customer's EMV chip card into the **card slot at the base** of the device, chip end first, and hold in place until the transaction completes.
{% endtab %}

{% tab title="8b — Magnetic Stripe" %}

<div align="center"><img src="/files/zC7FWlmn05UACTp3OPbD" alt="Step 8b — Swipe magnetic stripe card through the MSR slot at the top of the device"></div>

Swipe the customer's magnetic stripe card through the **MSR slot at the top** of the device in one smooth, continuous motion in either direction.
{% endtab %}

{% tab title="8c — NFC Contactless" %}

<div align="center"><img src="/files/d4W9AADELLMyZbKO1qIy" alt="Step 8c — Tap contactless card or device on the NFC symbol at the top of the device"></div>

Have the customer tap their contactless card, smartphone, or wearable on the **NFC contactless symbol** at the top of the device and hold until confirmed.
{% endtab %}
{% endtabs %}

***

## 9. Scan Barcodes

<figure><img src="/files/kJEmzaQWhLjWxd6llV6J" alt=""><figcaption></figcaption></figure>

Point the **rear camera** at the customer's barcode or QR code. The camera will automatically detect and scan the code. A confirmation beep or on-screen message indicates a successful scan.

***

{% hint style="success" %}
Your V660p-A is now set up and ready to use. For software configuration, refer to your integration documentation or contact your Verifone partner.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://sandbox-docs.verifone.com/install-guide-type-2/readme.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.